Forging Press Device Operation Standards

Forging Press Device Operation Standards

1. Pre-Startup Preparation Step 1: Before initiating the pressing process, the operator should wear protective gear at all times and perform a comprehensive equipment inspection. Step 2: Before starting up the equipment, the operator must <color=#00E1FFFF>ensure the stock has been placed correctly</color> to prevent mechanical damage to the equipment due to idling. Step 3: <color=#00E1FFFF>Check the equipment's energy supply system</color> to ensure that the equipment can run within normal parameters. Once the above inspection steps have been completed, <color=#00E1FFFF>the pressing process can be initiated at the terminal</color>. 2. Pressing Process Operation When the pressing process is activated, the press will cause the stock to enter an <color=#00E1FFFF>activated state</color>. You need <color=#00E1FFFF>to activate the press when the stock is giving off an orange-red light</color>. Operating the press with the hammers can effectively induce deformation, so the operator must pay close attention to the state of the stock at all times during operation and <color=#00E1FFFF>manually operate the press with the hammers with the right timing</color>. 3. Troubleshooting To facilitate the operator's self-inspection, a fail-safe system has been installed on the base of currently available equipment models. The operator can troubleshoot system problems based on the errors reported by the fail-safe system. For more detailed instructions, please consult the <color=#00E1FFFF>"Emergency Response Handbook: 3rd Edition"</color>.